Intel 1037U

32
[75C/167F].
CPUFAN1 Smart Mode
Press [Enter] to make settings for Smart Fan Configuration:
The optional settings are: [Disabled]; [Enabled]. When set as [Enabled], the
following sub-items shall appear:
FAN Off Temperature Limit
Use this item to select a value at which the fan will be off when the temperature is
lower than this limit.
FAN Start Temperature Limit
Use this item to select a value at which the fan will start when the temperature is
higher than this limit.
FAN Full Speed Temperature Limit
Use this item to select a value at which the fan will run at full speed when the
temperature is higher than this limit.