BIOS Setup Program
93
4.7.1 Boot Device Priority Submenu
To access this menu, select Boot on the menu bar and then Boot Devices Priority.
Maintenance Main Advanced Security Power
Boot
Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu represented in Table 60 is for setting boot devices priority.
Table 60. Boot Device Priority Submenu
Feature Options Description
1
st
Boot Device
2
nd
Boot Device
3
rd
Boot Device
4
th
Boot Device
• Removable Dev.
• Hard Drive
• ATAPI CD-ROM
• Intel
®
Boot Agent
(Note)
• Disabled
Specifies the boot sequence according to the device type.
The computer will attempt to boot from up to five devices
as specified here. Only one of the devices can be an IDE
hard disk drive. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
The default settings for the first through fourth boot
devices are, respectively:
• Removable Dev.
• Hard Drive
• ATAPI CD-ROM
• Intel Boot Agent
Note: The boot device identifier for Intel Boot Agent (IBA) may vary depending on the BIOS release.
To Next Page
Loading...
Need help?
General
