Intel Desktop Board D845GERG2/D845GEBV2 Product Guide
56
Hardware Management Submenu
Maintenance Main Advanced Security Power Boot Exit
Hardware Management
The menu shown in Table 24 is used to configure hardware management features.
Table 24. Hardware Management
Feature Options Description
Fan Control • Disabled
• Enabled (default)
Disables or enables system fan control.
Lowest Fan Speed
• Low (default)
• Off
This option defines the fan speed at the lowest system
temperature. Low allows the fans to continue to run at a
reduced speed at low system temperatures. Off turns off
the fans at low system temperatures.
Security Menu
Maintenance Main Advanced Security Power Boot Exit
The menu shown in Table 25 is used to set passwords and security features.
Table 25. Security Menu
If no password entered previously:
Feature Options Description
Supervisor Password Is No options Reports if there is a supervisor password set.
User Password Is No options Reports if there is a user password set.
Set Supervisor Password Password can be up to seven
alphanumeric characters.
Specifies the supervisor password.
Set User Password Password can be up to seven
alphanumeric characters.
Specifies the user password.
Clear User Password
(Note 1)
• Yes (default)
• No
Clears the user password.
User access Level
(Note 2)
• Limited
• No access
• View Only
• Full (default)
Sets BIOS Setup Utility access rights for
user level.
Notes:
1. This feature appears only if a user password has been set.
2. This feature appears only if both a user password and a supervisor password have been set.
To Next Page
Loading...
Need help?
General
