Intel DH61BE Product Guide

Installing and Replacing Desktop Board Components
33
Installing and Removing a Processor
Instructions on how to install the processor on the Desktop Board are given below.
Installing a Processor
CAUTION
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not
be lit (see Figure 4 on page 25). Failure to do so could damage the processor and the
board.
T
o install a processor, follow these instructions:
1. Observe the precautions in "Before You Begin" on page 29.
2. Unlatch the
processor socket lever by pushing it down and away from the socket
(Figure 7, A, B).
Figure 7. Unlatch the Socket Lever

Intel DH61BE Specifications

General

Form Factor	Micro ATX
Chipset	Intel H61
Socket	LGA 1155
Memory Type	DDR3
Memory Slots	2
Max Memory	16 GB
PCI Express x16	1
PCIe 2.0 x1 Slots	2
SATA Ports	4
RAID Support	No
Ethernet	10/100/1000 Mbps
Onboard Video	Yes
Video Output	DVI, VGA