Desktop Board Features
19
Intel
®
Rapid Recover Technology
The board incorporates Intel
®
Rapid Recover Technology (Intel
®
RRT). Intel RRT is a
feature of Intel RST. Intel RRT uses RAID 1 (mirroring) functionality to copy data from
a designated master drive to a designated recovery drive. The master drive data can
be copied to the recovery drive either continuously or on request.
When using the continuous update policy, changes made to the data on the master
drive while the recovery drive is disconnected or offline are automatically copied to the
recovery drive when it is reconnected. When using the on request update policy, the
master drive data can be restored to a previous state by copying the data on the
recovery drive back to the master drive.
Expandability
Intel Desktop Board DQ67OW provides the following expansion capability:
• One PCI Express 2.0 x16 interface
• One PCI Express 2.0 x4 interface
• One PCI Express 2.0 x1 interface
• One Conventional PCI bus interface
Legacy I/O
The board’s Legacy I/O Controller provides the following legacy features:
• A parallel port back panel connector
• A diskette drive interface
• One PS/2 back panel connector for mouse/keyboard support
• One serial port header
• Serial IRQ interface compatible with serialized IRQ support for Conventional PCI
bus systems
• Intelligent power management, including a programmable wake-up event interface
• Conventional PCI bus power management support
The BIOS Setup program provides configuration options for the Legacy I/O controller.
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, and the
PCI/PCI Express and SATA auto-configuration utilities. The BIOS is stored in the Serial
Peripheral Interface (SPI) Flash memory device.
The BIOS can be updated by following the instructions in Chapter 3 starting on
page 67.
To Next Page
Loading...
Need help?
General
