5-10 PRO/100 LAN+Modem PC Card User’s Guide
a Click Modem Setup in the Network & Modem Setup window.
b In the Modem Selection and Customization window.
Select the COM # that is assigned to the Intel modem under
Modem Port.
Highlight "EtherExpress PRO/100 LAN+Modem PC Card,"
then click OK.
Note: Use the default initialization string. If you need to change
the string, you may do so under the Edit Commands options.
CompuServe WINCIM version 2.5.1 with Internet Ex-
plorer version 2.1
To set up the Intel modem or modify the present configuration:
1 Click Special.
2 Click Session Settings.
a Indicate which COM port is assigned to the Intel modem under
Connector.
b Select the speed of the Intel modem under Baud Rate.
c Click once in the box to the left of Use Winsock, for Internet
access.
3 Click Modem in the Setup Session Settings window.
a In the Modem Current Settings window, select "Other" under
Modem.
b Use the default initialization string. If modification is required,
enter the necessary changes in the Initialize: section.
c Click OK, to update configuration and close menus.
CompuServe WINCIM version 3.02 with Windows 95
To set up the Intel modem or modify the present configuration:
1 Click Access or the Setup icon.
To Next Page
Loading...
Need help?
General
