Intel Galileo

Intel® Galileo Development Kit for IoT - Tutorial Guide Revision 1.0 – 20-Feb-2014
(Page 24 of 32)
2. Select 'C/C++ Remote Application' → Your project configuration name (e.g.
myICCproject_gdb_i586-poky-linux) → Select 'galileo' in the connection drop-down menu.
Figure-25: Debug configuration remote path setup
3. By clicking the 'Browse' button next to the 'Remote Absolute File Path for C/C++ Application'.
4. For the first time access to the Galileo board, the system will prompt you to enter root password
optionally.
Figure-26: Optional root password to access remote target