Intel Galileo

Intel® Galileo Development Kit for IoT - Tutorial Guide Revision 1.0 – 20-Feb-2014
(Page 28 of 32)
3. Transfer the binary to its desired location on the Galileo target e.g. Expand the ‘galileo’ tab in
the ‘Remote System Explored’ window -> ‘Sftp Files’ -> ‘Root’ -> ‘/‘-> right click ‘tmp’ ->
Click ‘Paste’
Figure-31: Destination for copy on remote target
4. Make the binary executable on your Galileo target: Right click the binary transferred in the
previous step -> Select ‘Properties’ -> Click ‘Permissions’ -> Adjust the permissions as
required -> Click Apply -> Click OK to close the dialog
Figure-32: Destination for copy on remote target