Intel® Galileo Development Kit for IoT - Tutorial Guide Revision 1.0 – 20-Feb-2014
(Page 8 of 32)
6. Your Host PC will boot from the USB key and you will be presented with the following menu.
For most modern computers the first (default) option should be sufficient (kernel 3.10). If you
have older hardware or experience boot failures, please boot the 3.2 kernel (486 or 686-pae
depending on your hardware).
7. Select the option corresponding to your CPU architecture and Press Enter.
Figure 2: Menu on Boot from Live USB Key
To Next Page
Loading...
