Intelbras RF 301K - Wi-Fi Signal and Scheduling Options; Wi-Fi Protected Setup (WPS); Advanced Wi-Fi Network Settings

13
Note: the Wi-Fi Network Password eld allows only the following characters:
Space ! “ # $ % & ‘ ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9
: ; < = > ? @ A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z [ \ ] ^ _ ` a b c d e f g h i j k l m
n o p q r s t u v w x y z { | } ~
» Wi-Fi signal strength: allows you to congure the power of your 301K RF. Use the high Power if you want the router
to operate at its maximum range. If you are still having problems with the signal range, we recommend checking your
router’s installation location as described in the item Cuidados e segurança ,or using a Wi-Fi signal repeater.
» Wi-Fi Network Scheduling: allows you to schedule a time to turn off your Wi-Fi network. Scheduling will only work
if the system time is synchronized with the Internet. You can check the system time in System settings>Time and Date . To
disable your Wi-Fi network at a scheduled time, simply enable the option Scheduling , choose the interval at which you
wish to disable the Wi-Fi network, and the days on which the scheduling should take effect.
» WPS: the function WPS allows you to connect devices to your Wi-Fi network quickly and securely. If you have any device
compatible with the technology WPS you can allow it to access your router’s Wi-Fi network via one of the available WPS
modes: Physical button (PBC) or PIN .
» Physical Button (PBC): if the device you wish to connect to your Wi-Fi network has a WPS button:
1. Press the button WPS/RST , located on the back of your RF 301K, for approximately 1 second.
The product will be available for WPS connection for about 2 minutes. You can also activate WPS through the PBC
button available in the web conguration interface
2. Within 1 minute after pressing the WPS/RST button on your router, press the WPS button on your wireless device
and wait while the connection is established.
Tip: Some devices, for example smartphones with Android
®
operating system, have a virtual WPS button,
i.e., they allow WPS activation through the advanced Wi-Fi network settings.
» PIN mode : If your wireless device (smartphone, tablet or other) requests a number to establish the WPS connection,
you can get the current PIN from your router in the WPS settings. Simply enter the number on your wireless device
and then proceed with the connection.
» Operationmode: allows you to choose which technologies your router will operate on.
Note: limiting to some technology may cause some device not to be able to connect to your Wi-Fi network, so we
recommend using the router’s default values.
» Channel: operation channel of the router’s Wi-Fi network. You can check, through specic applications for this purpose,
which channel is less busy and then use it on your router to improve product performance.
» Bandwidth: you can set the bandwidth to 20 MHz, 40 MHz or let the router choose the best option by selecting the
option Automatic .