Intelbras RF 301K - Technical Specifications; LED Indicator Guide; Package Contents List

5
1. Technical specications
Hardware
Chipset RTL8196E + RTL8192ER
Flash memory 2 MB
SDRAM memory 16 MB
2 xed antennas 5 dBi
3 LAN ports 100 Mbps (each)
1 WAN port 100 Mbps
Wireless parameters
Standards IEEE 802.11b/g/n
Radio mode MiMo
Mode of operation
AP Router
Wireless repeater
Wireless client
Access point
Frequency of operation 2.4 GHz
Bandwidth 20 and 40 MHz
Transmission rate Up to 300 Mbps
Channels of operation 1-13 (Brazil)
Maximum power (EIRP) 20 dBm (100 mW)
Security WPA-WPA2/PSK
Supply
Input 100-240 V to 50/60 Hz
Maximum power
consumption
5.4 W
1.1. Description of LEDs
Description of LEDs
SYS
On: router initializing
Flashing: normal operation
WLAN
On: The Wi-Fi network is activated, but no data trafc
Off: The Wi-Fi is deactivated
Flashing: The Wi-Fi network is activated and there is data trafc
LAN 1/2/3
On: there is a device connected to the corresponding port, without data trafc
Off: no device connected to the corresponding port
Flashing: there is a device connected to the corresponding port, with data trafc
WAN
On: there is a device connected to the corresponding port, without data trafc
Off: no device connected to the corresponding port
Flashing: there is a device connected to the corresponding port, with data trafc
2. Package contents
» 1 RF 301K wireless router
» 1 network cable
» 1 power supply
» 1 installation guide