To Next Page

To Previous Page

1. Press YES to enter setup mode.

2. Press NEXT six times to enter the Use DiSEqC

1.2 menu.

3. Press YES to set the use of DiSEqC 1.2.

SETUP MODE ?

SET SAT PAIR ?

USE DISEQC 1.2 ?

YES

Setting the Use of DiSEqC 1.2

If DiSEqC 1.2 protocol is in use on your IRD, enable the DiSEqC 1.2 set-

ting on the ACU to process the DiSEqC 1.2 command.

4. Set the USE DiSEqC 1.2 to a desired option*.

PREV - Shows previous option (YES/NO)

SELECT/ENTER - Set the displayed option for

DiSEqC 1.2.

NEXT - Shows next option (YES/NO)

Press ENTER to move to next screen.

5. Press YES to accept the data.

Press NO to cancel and return to main setup

mode.

USE DISEQC 1.2 : NO

PREV SELECT

SAVE ?

YES

Options for ‘USE DiSEqC 1.2’

YES - Select this option if the DiSEqC 1.2 is used.

NO - Select this option if the DiSEqC 1.2 is not used.

Intellian i3 User Manual

Other manuals for Intellian i3