25
Aptus Web for the Mediator
Page Login
1. Choose either to Control & Monitor the Intelligent
Mediator (Control & Monitoring) or Only Monitor the
Intelligent Mediator (Monitoring Only).
2. Log into the Intelligent Mediator by typing in User Name
and Password information. If this system has not been
changed from the factory default:
• User Name: intellian
• Password: 12345678
Main Page
WARNING
WARNING: The Control & Monitoring Mode will be switched to the Monitoring Only Mode in the following cases;
• If PC Software (Aptus) is connected using TCP/IP Communication while Aptus Web Control is in use.
• If Control & Monitoring Mode is accessed while PC Software is running via TCP/IP Communication. In this case, the
web page will display a pop-up message asking if you want to disconnect the PC Software network connection. If you
select 'No', the Control & Monitoring Mode will be switched to the Monitoring Only Mode.
NOTE
NOTE: After entering with the default password,
the user must change the default password to a
new password for security.
To Next Page
Loading...
Need help?
General