AUTOCALIBRATION *(AUT -
CAL) / INTERNAL
CALIBRATION * (I-CAL)
* These functions are available ONLY
for models provided with servomotor
and internal calibration weight.
Before effecting internal calibration, be
sure no weight is loaded on the pan.
Press CAL key at empty pan.
- CAL -
lb oz ct g
The message “CAL” will be displayed.
Internal calibration weight is then loaded.
0.00
lb oz ct g
When the message “0.00“ will be
displayed, the balance returns to normal
weighing conditions.
The message “ERROR” will be displayed
if calibration is not effected because of
vibrati
0.00
lb oz ct g
To Next Page
Loading...
