Intelligent Weighing Technology QHD+3 User Manual

- 24 -
9. ERROR DISPLAY
Error Message Description Solution
-----
Maximum load exceeded Unload or reduce weight
Err 1
Incorrect date Enter the date by using format
“yy;mm:dd”
Err 2
Incorrect time Enter the time by using format
“hh:mm:ss”
Err 4
Zero setting error Zero setting range exceeded due
to switching on.(4%max)
Make sure platform empty.
Err 5
Key board error Check the keys and connecter.
Err 6
A/D value out of range Make sure platform empty and
check the pan is installed proper.
Check the load cell connectors.
Err 9
Unstable Reading Check any air variation, vibration,
RF noise and touching some
where.
Check the load cell and
connecters.
Err 17
Tare out of range Remove the load and restart scale
again.
--ol--
Over range Remove the load.
Re calibrate
Fai l h /
fai l l
Calibration Error Re calibrate
Err p
Printer error Check the printer and settings
Ba lo /
lo ba
Battery low Re charge battery, check the
voltages.

Intelligent Weighing Technology QHD+3 Specifications

General

Brand	Intelligent Weighing Technology
Model	QHD+3
Category	Scales
Language	English