Unpacking and Installation
Unpacking and Installation
Although it is neither complicated to install nor difficult to operate your power Amplifier, a few minutes of
your time is required to read this manual for a properly wired installation and becoming familiar with its
many features and how to use them. Please take a great care in unpacking your set and do not discard the
carton and other packing necessary to return your set for when moving your set and are required if it ever
becomes necessary to return your set for service. Never place the unit near radiators, in front of heating
vents, to direct sun light, in excessive humid or dusty location to avoid early damage and for your years of
quality use. Connect your complementary components as illustrated in the following page.
M-1500/2000
1
POWER AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of electric
shock to persons.
This symbol is intended to alert the user to the
presence of important operation and mainte-
nance (servicing) instructions in the literature
accompanying the appliance.
Caution: To prevent electric shock do not use this (polarized) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade expo-
sure.
Attentions: Pour prévenir les chocs électriques ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de
courant on une autre sortie de courant, sauf si les
lames peuvent étre insérées à fond sans en laisser
aucune partie à découvert.
To Next Page
Loading...
Need help?
General
