Interacoustics OtoRead - Connections and Settings Configuration

OtoRead Screener Operation Panel Dictionary Page 39
SAVE TESTS
The Save Mode menu allows the user to change the
number of tests stored in the
OtoRead from only the
most recent test result for each ear (L/R) to 250 tests.
STD 762.03
#0123456
Is shown briefly upon turning on the OtoRead.
Indicates the type of
OtoRead, the software version
and the serial number.
REVIEW
Press the DOWN key to review the bar graphs which
are t
he test results displayed as the emissions are
measured.
TIME/DATE ERROR
Will appear if the Instrument’s batteries go dead and
are not replaced within approximately one hour.
MIN VALUE
The minimum Amplitude screen which allows the user
to set the unit to
include minimum amplitude values in
the pass/refer criterion.
ON
Turns the parameter on.
OF
Turns the parameter off.
CLOCK MODE
The Clock Mode menu allows the user to change the
clock from a 12 hour mode to a 24 hour mode.
LANGUAGE
The Language setup allows the user to select among
English, German, Spanish and French.
RESET TO DEFAULT
Selecting the LEFT or RIGHT arrow key in the Reset
to Default menu will return the instrument settings to
their factory settings (does not affect the custom
settings).
RESET
Press the LEFT or RIGHT arrow key to return the
instrument settings to their factory settings
DP
The OtoRead will test in the DPOAE mode.
TE
The OtoRead will test in the TEOAE mode.