8. Click the Arming Schedule tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note: All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in Configuration
> System > System Settings.
9. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
10. Click Save to save changes.
11. Click the Linkage Method tab to specify the linkage method for when an event
occurs. Select one or more response methods for the system when an alarm is
triggered. See “Linkage methods” on page 31 for details.
12. Click Save to save changes.
To set up motion detection in advanced mode:
1. From the menu toolbar, click Configuration > Basic Event > Motion Detection.
2. Select the Enable Motion Detection check box. Check Enable Dynamic Analysis
for Motion to see where motion occurs in real-time.
Note: Select Local > Rules > Disable to not have detected objects indicated with
green rectangles.
3. Select Advanced from the Configuration drop-down list.
TruVision 81 Series IP Camera Configuration Manual 33
To Next Page
Loading...
