15. Click Save to save changes.
Tamper-proof alarms
The camera can be configured to trigger an alarm when the lens is covered and take an
alarm response action.
To set up tamper-proof alarms:
1. From the menu toolbar, click Configuration > Event > Basic Event > Tamper-
proof.
2. Select the Enable check box.
3. Move the Sensitivity slider to set the sensitivity of the detection.
4. Click Save to save changes.
5. Click the Arming Schedule tab to edit the arming schedule. Click and drag along
the time bars or click on a time bar to configure arming schedule times.
Note: All scheduled times are based on the 24-hour clock. Ensure that the correct
time zone and daylight saving time settings have been configured in Configuration
> System > System Settings.
6. Click
to copy the schedule to other days by selecting the corresponding check
box next to the day.
7. Click Save to save changes.
8. Click the Linkage Method tab to specify the linkage method for when an event
occurs. Select one or more response methods for the system when an alarm is
triggered. See āLinkage methodsā on page 31 for details.
9. Click Save to save changes.
TruVision 81 Series IP Camera Configuration Manual 35
To Next Page
Loading...
