4. Click Save to save changes.
To set up timed snapshots:
1. From the menu toolbar, click Configuration > Storage Schedule Settings >
Snapshot > Snapshot Parameters.
2. Select Enable Timing Snapshot to enable continuous snapshots.
3. Select the file format for the snapshot from the Format drop-down list.
4. Select the resolution and quality of the snapshot from the Resolution and Quality
drop-down lists.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: millisecond, second, minute, hour, or day.
6. Click Save to save changes.
To set up event-triggered snapshots:
1. From the menu toolbar, click Configuration > Storage > Snapshot > Snapshot
Parameters.
2. Check Enable Event-triggered Snapshot to enable event-triggered snapshots.
3. Select the file format for the snapshot from the Format drop-down list.
4. Select the resolution and quality of the snapshot from the Resolution and Quality
drop-down lists.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: millisecond, second, minute, hour, or day.
6. Under Capture Number, enter the total number of snapshots required.
44 TruVision 81 Series IP Camera Configuration Manual
To Next Page
Loading...
