Chapter 2: Installation
TruVision NVR 10 User Manual 7
Figure 2: Back panel connections
Four-channel model:
Eight-channel PoE model:
1. Embedded PoE ports to connect up to eight IP
cameras (depending on model).
2. Connect up to four alarm inputs and one alarm
relay output.
3. Connect to a network device such as a
computer.
4. Connect to speakers for audio output.
5. Connect to a VGA monitor.
6. Connect to an HDTV. The HDMI connection
supports both digital audio and video.
7. Universal Serial Bus (USB 3.0) port. Connect
to an additional device such as a USB mouse,
CD/DVD burner or USB HDD.
8. Connect to ground.
9. Connect to a power cord.
10. Connect to a 12 VDC power supply.
To Next Page
Loading...
