Chapter 3: Getting started
12 TruVision NVR 10 User Manual
9. Adding IP Camera:
Click Search to find any online cameras. Select the IP camera to be added, enter
User name and Admin password, and then click the Add button. Click, Next to
move to the Recording Configuration window.
10. Recording configuration:
Configure your recording settings as required. The settings apply to all cameras
connected to the NVR.
Check the Constant Recording check box for the NVR to record continuously all
day. If left unchecked, the NVR will not record.
Check the desired time lapse check box, TL-Hi or TL-Lo.
To record motion detection events, check Event (Motion).
To record alarm events, check Alarm.
11. When all the required changes have been entered, a page appears showing all the
settings.
To Next Page
Loading...
