Chapter 8: Network settings
62 TruVision NVR 10 User Manual
Figure 10: Bad sector detection window
To set up an HDD group:
1. From the menu toolbar, click System Settings > HDD > Bad Sector Detection.
2. Select the HDD you want to test.
3. Select whether you want to do a key sector detection or a full detection, and click
Detect.
4. The system checks the HDD. The color-coded result is displayed on screen. If there
are bad sectors found, click Error Info to see a list of the errors found.
5. If required, click Pause to pause the test or Cancel to cancel it.
6. Click Back to return to live view, or continue configuring the NVR settings.
To Next Page
Loading...
