30 TruVision 11/31 Series IP Camera Configuration Manual
9. Select the Font color that you want (8).
10. Click Save to save changes.
Note:
1. If you set the display mode as transparent, the text varies according the
background. With some backgrounds, the text may be not easily readable.
2. When you enable motion detection, it is recommended not to select the
flashing display option as overlay text may trigger a motion alarm.
Overlay text
You can add up to four lines of text on screen. This option can be used, for
example, to display emergency contact details. Each text line can be positioned
anywhere on screen. See Figure 7 below.
Figure 7: Text overlay menu
To add on-screen text:
1. Click Configuration > Image >Text Overlay.
2. Check the box for the first line of text.
3. Enter the text in the text box.
4. Use the mouse to click and drag the red text in the live view window to adjust
the text overlay position.
5. Repeat steps 2 to 4 for each extra line of text, selecting the next string
number.
6. Click Save to save changes.
To Next Page
Loading...
