TruVision 11/31 Series IP Camera Configuration Manual 31
Privacy masks
Privacy masks let you conceal sensitive areas (such as neighboring windows) to
protect them from view on the monitor screen and in the recorded video. The
masking appears as a blank area on screen. You can create up to four privacy
masks per camera.
Note: There may be a small difference in size of the privacy mask area
depending on whether local output or the web browser is used.
Figure 8: Privacy mask menu
To add privacy mask area:
1. Click Configuration > Image > Privacy Mask.
2. Check the Enable Privacy Mask.
3. Click Draw Area.
4. Click and drag the mouse in the live video window to draw the mask area.
Note: You are allowed to draw up to four areas on the same image.
5. Click Stop Drawing to finish drawing, or click Clear All to clear all of the
areas you set without saving them.
6. Click Save to save changes.
Motion detection alarms
You can define motion detection alarms. A motion detection alarm refers to an
alarm triggered when the camera detects motion. However, the motion alarm is
only triggered if it occurs during a programmed time schedule.
To Next Page
Loading...
