46 TruVision 11/31 Series IP Camera Configuration Manual
Figure 14: NAS menu
To set up a NAS system:
1. Click Configuration > Storage > NAS.
2. Enter the IP address of the network disk, and the NAS file path.
3. Click Save to save changes.
Storage devices
Use the storage management window to display the capacity, free space
available and the working status of the HDD of the NAS and the SD card in the
camera. You can also format these storage devices.
Before formatting the storage device, stop all recording. Once formatting is
completed, reboot the camera as otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage
becomes full.
To Next Page
Loading...
