56 TruVision 11/31 Series IP Camera Configuration Manual
To import/export configuration file:
1. Click Configuration > System > Maintenance.
2. Click Browse to select the local configuration file and then click Import to
start importing configuration file.
3. Click Export and set the saving path to save the configuration file.
Upgrade firmware
The camera firmware is stored in the flash memory. Use the upgrade function to
write the firmware file into the flash memory.
You need to upgrade firmware when it has become outdated. When you upgrade
the firmware, all existing settings are unchanged. Only the new features are
added with their default settings.
The camera will select the corresponding firmware file automatically. Cookies
and data in the web browser are automatically deleted when the firmware is
updated.
To upgrade firmware version:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/video/product/truvision-ip-open-standards-outdoor-
cameras/
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. When the firmware file is downloaded to your computer, extract the file to the
desired destination.
Note: Do not save the file on your desktop.
3. In the Configuration folder, select the System tab.
4. In the Maintenance tab, select the Firmware or Firmware Directory option.
Then click the Browse button to locate latest firmware file on your computer.
• Firmware directory – Locate the upgrading folder of Firmware files. The
camera will choose the corresponding firmware file automatically.
• Firmware – Locate the firmware file manually for the camera.
Note: Please select Interlogix_Gen_3_ipc.dav for product models listed in
“Introduction” on page 3.
5. Click Update. You will receive a prompt asking you to reboot the camera.
6. When the upgrade is finished, the device will reboot automatically. The
browser will also be refreshed.
To Next Page
Loading...
