TruVision 11/31 Series IP Camera Configuration Manual 39
To define the alarm output:
1. Click Configuration > Events > Alarm Output.
2. Select one alarm output channel from the Alarm Output drop-down list. You
can also set a name for the alarm output.
3. The delay time can be set to 5 sec, 10 sec, 30 sec, 1 min, 2 min, 5 min or
10 min. The delay time refers to the time duration that the alarm output
remains in effect after alarm occurs.
4. Click Edit to set the arming schedule for the alarm input. See “To set up
motion detection” for more information.
5. Click Save to save changes.
To Next Page
Loading...
