TruVision Series 3 IP Camera FW3.1 Configuration Manual 21
To define the 802.1X parameters:
1. Click Configuration > Network > 802.1X.
Check Enable IEEE 802.1X to enable the feature.
Configure the 802.1X settings, including EAPOL version, user name, and
password. The EAPOL version must be identical with that of the router or the
switch.
Click Save to save changes.
To define the QoS parameters:
1. Click Configuration > Network > QoS.
2. Configure the QoS settings, including Video / Audio DSCP, Event / Alarm
DSCP, and Management DSCP. The valid value range of the DSCP is 0 to
63. The larger the DSCP value, the higher the priority.
3. Click Save to save changes.
To Next Page
Loading...
