To Next PageTo Next Page
Need help?Do you have a question about the Interlogix VE1016 Series and is the answer not in the manual?
General| Coverage | 360° |
|---|---|
| Temperature Range | 14° to 122°F (-10° to 50°C) |
| Mounting Height | 2.4m (8ft) recommended |
| Tamper Switch/Protection | Yes |
| Humidity Range | 95% RH, non-condensing |
| Current Draw/Consumption | 12mA (typical), 17mA (max) |
Step-by-step instructions for mounting and wiring the detector.
Description of the function for jumper J1.
Control of the detector's LED status via jumper J2.
Setting for dual loop connection using jumpers J3 and J4.
Setting terminal 8 for Day/Night mode or remote test.
Setting the control voltage polarity for jumpers J6.
Controls when AM/TF signals are output based on system mode.
Setting the sensitivity level for the anti-masking feature.
Configures the auto or authorized reset for AM/TF status.
Defines how AM and TF signals are transmitted via relays.
Controls the behavior and visibility of detector LEDs.
Ensuring proper anti-masking calibration during detector startup.
Modifying the detector's detection pattern using blinders.
Indicates the status of the PIR detector's LED.
Indicates the status of LEDs for PIR and Anti-Masking.
