Intermatic HA09 User Manual

Page 1 of 20 158HA11646
HA09 - HANDY REMOTE CONTROLLER INSTRUCTIONS
Thank you for purchasing Intermatic’s HomeSettings
devices. With these products you can reliably and remotely
control lighting and appliances. The outstanding features of
the HomeSettings program include:
 Feedback that will allow you to see whether your
device has received the ON/OFF/DIM signal.
 Ease of installation
 RF signal reliability – each HomeSettings product
has a special repeater feature that virtually
guarantees that RF signals are received.
 If required, more than one controller can be used
for the same system.

Intermatic HA09 Specifications

General

Brand	Intermatic
Model	HA09
Category	Remote Control
Language	English

Summary

Z-Wave Technology and Network Functionality

Repeater Functionality Explained

Installing Batteries in Remote

Accessing the Battery Compartment

Correct Battery Insertion

Securing the Battery Compartment

Installation and Setup Recommendations

Creating a Z-Wave Network

Including Modules into a Network

Accessing Control Buttons

Initiating Module Inclusion Process

Pressing the INCLUDE button to ready the controller for adding modules.

Completing Module Inclusion

Module Programming for Inclusion

Pressing the module's programming button to complete inclusion.

Repeating Module Inclusion Steps

Instructions to repeat steps for each module to be included.

Associating Modules to Channels

Starting Channel Association

Pressing and holding ON/OFF buttons on the controller for a channel.

Setting Light Levels for Modules

Confirming Module Association

Excluding Devices from Network and Channels

Excluding Modules from the Network

Procedure to exclude modules from the entire network using the DELETE button.

Excluding Modules from a Specific Channel

Procedure to exclude modules from a specific channel.

Remote Control Operation

Turning Devices ON or OFF

Pressing and releasing ON/OFF buttons to control devices.

Dimming Devices Up or Down

Pressing and holding ON/OFF buttons to adjust light levels.

Controller Reset Procedures

Resetting Network and Channels

Resets all network and channel settings on the controller.

Resetting Channels Only

Controller Replication

Replicating Network and Channel Settings

Steps to copy all network and scene information to a secondary controller.

Troubleshooting: Inclusion/Exclusion and Replication

Resolving INCLUDE/DELETE Errors

Solutions for errors during module inclusion/exclusion, often related to controller type.

Fixing Controller Replication Issues

Troubleshooting: Device Operation

Troubleshooting Module Not Turning On

Checks for power, bulb issues, and incorrect association levels.

Troubleshooting Programmed Events