Chapter 4 — Developing and Installing Applications
CK32 I-Safe Handheld Computer Users Manual 89
Installing Applications Using SmartSystems Foundation
You can use the SmartSystems server to drag-and-drop Intermec
applications onto your CK32 I-Safe. The CK32 I-Safe ships with
the SmartSystems client, which means it is SmartSystems-
enabled. The console is part of SmartSystems Foundation, which
you can download from www.intermec.com/SmartSystems. For
help using the console, see the online help.
To install an application using SmartSystems Foundation
1 Download your application file to your desktop PC.
2 Double-click the application file to install it. The application
file should appear in the software vault.
3 From the SmartSystems console in the Software Vault,
drag-and-drop the application onto each CK32 I-Safe in your
network.
Installing Applications Using Microsoft ActiveSync
You can use Microsoft ActiveSync to establish a connection
between your PC and the CK32 I-Safe. ActiveSync transfers files,
synchronizes files, performs remote debugging, and other device
management activities. For more information on ActiveSync see
“Using Microsoft ActiveSync” on page 36.
You can have a USB or 802.11 b/g ActiveSync connection to the
CK32 I-Safe. When you only have a few CK32 I-Safes to update,
you can copy files using Windows Explorer on a PC.
This procedure assumes that Microsoft ActiveSync is installed on
your PC and is up and running.
To install an application using ActiveSync
1 Use the AN1 Communications Adapter to connect the CK32
I-Safe to a PC or host via the USB port.
You may have to disconnect and then connect the cable to
“wake” the connection.
Intrinsically Safe rules prohibit direct connection to the CK32
I-Safe.
To Next Page
Loading...
Need help?
General
