Chapter 3 — Configuring the CK32 I-Safe
58 CK32 I-Safe Handheld Computer User’s Manual
Ping
Use the Ping tab to contact with any host in your network for
information.
Ping Tab Contents
1 From the Host drop-down list, select an IP address for the
host you want to ping. Enter a new IP address using the input
panel or the keypad. Select Clear List to remove all the IP
addresses from the drop-down list.
2 From the Repetitions drop-down list, select the number of
times to ping the selected host. These repetitions are done
once per second.
Ping
Timing Statistics Min: The shortest ping reply in milliseconds (ms)
Max: The maximum ping reply in milliseconds
Avg: The average ping reply time
Count: The number of pings already completed
Timeouts: The number of pings that did not receive a response
BSSID The MAC address for the access point radio
Channel: The channel on which the access point is communicating
RSSI The RSSI seen on the access point
Link The speed at which the last ping occurred
To Next Page
Loading...
