Chapter 3 — Configuring the CK32 I-Safe
54 CK32 I-Safe Handheld Computer User’s Manual
ISpyWiFi Tab Contents
WiFi Scan
Use the WiFi Scan tab to scan your network and bring back
WiFi NIC (Network Interface Card)
BCMCF1 A WLAN adapter and its associated driver version
MAC The client radio MAC address
IP(DHCP) The IP address of the client radio, if using DHCP
IP (Static) The IP address of the client radio, if using a static IP address
AP
Status Shows whether the radio is associated with the access point
Channel The channel on which the radio is communicating with the access
point
ESSID The text SSID (Network Name) for your network
BSSID MAC address of radio AP with which the client radio is communi-
cating
Config
Association Shows one of the following types:
Open, WPA, WPA-PSK, WPA2, Network EAP
Encrypt Shows potential encryptions for the association shown:
Key Absent/WEP, TKIP, Key Absent, TKIP/AES, WEP
Power CAM (Constantly Awake Mode) or FAST PSP (Power Save Poll)
Antenna Diversity (multiple antennas), Primary (one antenna)
RF
TX Power Transmit power level in milliwatts (mW).
RSSI The Received Signal Strength Indicator. The closer to zero, the bet-
ter. For example: -40dBm is excellent, while -60dBm is good.
Link The data rate at which the radios are communicating
To Next Page
Loading...
Need help?
General
