Chapter 3 — Configuring the CK32 I-Safe
CK32 I-Safe Handheld Computer User’s Manual 55
information about any access points with which you can
communicate.
Tap Scan, then wait for the table to fill with information. Tap
any of the columns to sort by ascending or descending order. Tap
the slider bar on the bottom to scroll left and right to view all of
the information.
WiFi Scan Tab Contents
Scan
SSID The SSID broadcast from the access point
Signal The RSSI seen from the access point
Channel Channel on which client radio is communicating with access point
BSSID The MAC address for the access point radio
Privacy “Y” - WEP, TKIP, or AES encryption is being used;
“N” - no encryption is being used
To Next Page
Loading...
