Chapter 1 — Using the CK32 I-Safe Handheld Computer
CK32 I-Safe Handheld Computer User’s Manual 23
2 Tap Settings > System.
3 Tap t h e Intermec Settings icon. The Intermec Settings
application appears.
4 From the Intermec Settings application, go to Data
Collection > Internal Scanner > Symbologies.
5 Enable or disable any of the supported symbologies.
6 Tap File > Save Setting to save your settings.
7 Tap File > Exit to close Intermec Settings.
8 Scan bar code labels.
Scanning a Bar Code Label to Verify Scanner Operation
Use the following procedure to practice how to scan a bar code
and to verify that your scanner is working correctly.
To scan most bar code labels and verify scanner operation
1 Press the Power button to turn on the CK32 I-Safe.
2 Tap Start on the navigation bar located at the top of the
screen.
3 Tap Word Mobile > New to open the Word Mobile
application and a blank document.
To Next Page
Loading...
