Chapter 3 — Configuring the CK32 I-Safe
CK32 I-Safe Handheld Computer User’s Manual 83
Disabling Security
If you choose not to use security with your wireless network, you
can disable it on the CK32 I-Safe. Intermec recommends that
you always set security in your network.
To disable security
1 Open Intermec Settings.
2 Choose Communications > 802.11 Radio > Microsoft
Security.
3 For Network Authentication, choose Open.
4 For Data Encryption, choose Disabled.
5 Close Intermec Settings.
To Next Page
Loading...
