Appendix A — Specifications
124 CK32 I-Safe Handheld Computer User’s Manual
Minimum Reading Distances With 1.087 cm (0.428 in) Setback
Accessories
You can use these accessories (sold and ordered separately) with
the CK32 I-Safe. To order accessories, contact your local
Intermec sales representative.
AN1 Communications Adapter (P/N 871-223-xxx)
An external adapter used to connect the CK32 I-Safe with wired
networks.
AC11 Quad Battery Charger (P/N 852-914-xxx)
Four battery charger. Charge rate is limited by I-Safe
requirements.
Handle (P/N 714-625-xxx)
The handle provides a convenient scanning trigger.
Hand Strap (P/N 825-183-xxx)
I-Safe leather hand strap
Carrying Strap Kit (P/N 825-186-xxx)
I-Safe leather carrying strap
AB6 Battery Pack (P/N 318-021-xxx)
Battery pack
Tethered Stylus (P/N 203-828-xxx)
Use the tethered stylus to make sure that you never lose your
stylus.
Symbology Density Minimum Distance Maximum Distance
Code 39 0.125 mm (5 mils) 8.564 cm (3.272 in) 17.962 cm (7.072 in)
0.25 mm (10 mils) 5.770 cm (2.272 in) 37.774 cm (14.872 in)
0.5 mm (20 mils) 7.802 cm (3.072 in) 78.922 cm (31.072 in)
1 mm (40 mils) 8.818 cm (3.472 in) 130.992 cm (51.572 in)
1.3 mm (51 mils) Depends on the symbology
length and scan angle
148.772 cm (58.572 in)
UPC/EAN 0.33 mm (13 mils) 5.516 cm (2.172 in) 46.918 cm (18.472 in)
Note: You must use the AN1 Communtications Adapter for all
wired connections to the CK32 I-Safe.
To Next Page
Loading...
