Chapter 2 — Understanding Windows Mobile
36 CK32 I-Safe Handheld Computer User’s Manual
Adding or Removing Programs
Programs added to your CK32 I-Safe at the factory are stored in
Read Only Memory (ROM). You cannot remove this software.
All other programs and files added to the CK32 I-Safe after
factory installation are stored in Random Access Memory
(RAM).
You can install any program created for the CK32 I-Safe, as long
as the computer has enough memory available. Go to the
Windows Mobile web site (www.microsoft.com/windowsmobile/
resources/communities/default.mspx) to find software.
Using Microsoft ActiveSync
Use Microsoft ActiveSync to synchronize the information on
your desktop with the information on the CK32 I-Safe.
Synchronization compares the data on the CK32 I-Safe with
your PC and updates both computers with the most recent
information.
You can also perform these functions with ActiveSync:
• Copy files between the CK32 I-Safe and the desktop.
• Back up and restore the CK32 I-Safe data.
• Control when synchronization occurs by selecting a
synchronization mode.
• Select which information types are synchronized and control
how much data is synchronized.
To install ActiveSync
1 Connect the CK32 I-Safe to your desktop PC using the AN1
Communications Adapter (P/N 872-223-xxx).
2 Install ActiveSync on your desktop. ActiveSync is available
from the Windows Mobile CD or from the Microsoft web
site. ActiveSync is already installed on the CK32 I-Safe.
Note: By default, ActiveSync does not automatically synchronize
all types of information. Use ActiveSync options to turn
synchronization on or off for specific information types.
Note: Intermec recommends using ActiveSync version 4.1 or later
with Windows Mobile devices. You can download the latest
version of ActiveSync on the Microsoft web site.
To Next Page
Loading...
