Chapter 4— Developing and Installing Applications
96 CK32 I-Safe Handheld Computer Users Manual
AutoExec Commands
Process return code uses standard error codes defined in
WinError.h.
AutoExec Keywords
Command Description
-% Passes an ID to use in a call to SignalStarted. This
argument is useful only during system startup that
relies on a SignalStarted to call. W is an integer
value.
-E Passes a signal event name to use when autoexec
completes. X is a string value.
-F Overrides the data file to use. This must be a fully
qualified name. Default is “autoexec.dat” in the
same location as the AutoExec.exe program. “Y” is
a string value.
-LOG Set to any value logs activity to AutoExec.txt (in the
same location as the AutoExec.exe program).
Default is disabled.
-W Pauses the autoexec process by calling sleep for the
number of seconds specified by Z. Z is an integer
value.
Keyword Description
-% Passes an ID to use in a call to SignalStarted. This
argument is useful only during system startup that
relies on a SignalStarted to call. W is an integer
value.
-E Passes a signal event name to use when autoexec
completes. X is a string value.
-F Overrides the data file to use. This must be a fully
qualified name. Default is “autoexec.dat” in the
same location as the AutoExec.exe program. “Y” is
a string value.
-LOG Set to any value logs activity to AutoExec.txt (in the
same location as the AutoExec.exe program).
Default is disabled.
-W Pauses the autoexec process by calling sleep for the
number of seconds specified by Z. Z is an integer
value.
To Next Page
Loading...
