Chapter 5— Troubleshooting and Maintenance
CK32 I-Safe Handheld Computer User’s Manual 117
Add just enough soap to a quantity of water to start and create
sudsing (using agitation while adding), but no more; you can't go
wrong with this solution. Keep in mind that the water should just
be warm; hot water can have adverse affects on some plastics.
• Ammonia is not compatible with polycarbonates, a major
component in the CK32 I-Safe housing; it is NOT
recommended as a cleaner.
• Plastic cleaners like 3M Plastic Cleaner, Plexus®, Meguiar’s®
PlastX, All Kleer Plastic Cleaner & Polish and the like all have
polishes (micro-abrasives) and waxes that make them
unsuitable for cleaning the handle and computer.
• Plastic protectants like Armor All® or Son of a Gun® are for
protecting plastic from UV rays. They clean to some degree,
but can leave the product slippery. Use at your own risk.
To clean the handle and computer
1 Unscrew the handle and remove it from the CK32 I-Safe.
2 Clean the surface of the magnet with a damp cloth.
3 Use adhesive tape to remove any metal debris from the surface
of the magnet in the handle.
4 Clean the computer and handle.
5 Reattach the handle.
To Next Page
Loading...
