Chapter 3 — Configuring the CK32 I-Safe
70 CK32 I-Safe Handheld Computer User’s Manual
6 From the Network type list, select either Infrastructure or
Ad-Hoc. Select Infrastructure if the network uses access
points to connect to the corporate network or internet. Select
Ad-Hoc to set up a private network with one or more
participants.
7 Enter the SSID (Network Name) if different than the profile
name.
8 Tap OK.
Configuring WEP Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 8021x Security, choose None.
3 For Association, choose Open or Shared to match the
settings on your access point.
4 For Encryption, choose WEP.
5 From the Data TX Key list, select the key you want to use for
transmitting data.
6 Define a value for the keys you want to use. You can define up
to four keys (Key 1 through Key 4).
Enter an ASCII key or a hex key that is either 5 bytes or 13
bytes long depending on the capability of the radio. Set a 5-
To Next Page
Loading...
