Intermec CK32

Chapter 3 — Configuring the CK32 I-Safe
CK32 I-Safe Handheld Computer User’s Manual 81
2 From Intermec Settings, select Communications > 802.11
Radio > Certificates.
3 Select Enroll Certificates and tap the Run App button. The
Enroll Certificates dialog box appears.
4 In the Enroll Certificates dialog box, enter the User Name,
Password, and Server (IP address) to log into the CA server.
5 Tap OK. A dialog box appears asking if you want to load the
root certificate.
6 Tap OK for yes. The Enrollment Tool message box appears
telling you that the user certificate has been added.
7 Tap OK to close the Enrollment Tool message box.
8 Configure your CK32 I-Safe for WPA, or 802.1x security.
To load certificates if you are using a third-party CA
1 From Intermec Settings, select Communications > 802.11
Radio > Certificates.
2 Select Import Certificates and tap the Run App button. The
certificates application appears.
3 Tap in the Import pfx Certificate box and navigate to
your private .pfx file.
4 Select the file and the path to your .pfx file now appears in the
text box.
5 Tap Import Certificate. A dialog box appears asking if you
want to add the certificate to the root store.
6 Press OK to add the certificate. A message box appears telling
you that the root certificate has been imported.
7 Tap OK to close the Success message box.
8 Tap Import User Cert. A dialog box appears telling you that
the user certificate and the associated key were successfully
imported.
9 Tap OK to close the Success message box.
10 Configure your CK32 I-Safe for WPA, or 802.1x security.