10 EasyLAN Wireless Quick Start Guide
Understanding the EasyLAN Wireless LEDs
LED Description
Orange Stays on when the printer is powered on. Blinks to
indicate an error.
Green and
Yellow
Provides information for the power-up diagnostic and
network activity:
Green Yellow Indicates
Off Off Network not active
Off On Reserved
Off Blink Reserved
On Off Reserved
Blink Off Reserved
On On Wireless network active
Blink Blink Wireless network data received
Installing EasyLAN Wireless
When you first consider installing EasyLAN Wireless printers in
your data collection network, you should arrange for a site
survey. An Intermec representative analyzes the range of radio
frequency devices in your facility and determines the placement
of the access points and printers with EasyLAN Wireless. The
site survey ensures that the coverage overlaps to provide
uninterrupted wireless communication at any location within
your building. This guide assumes that a site survey is complete
and the wireless network is installed in your facility.
This guide also assumes that you have loaded media and ribbon
into the printer and connected the printer to power. For help,
see the printer quick start guide.
If you are simply using the printer with EasyLAN Wireless in an
ad-hoc network, make sure that your PCs with 802.11b radios
are configured.
To Next Page
Loading...
