Intermec EasyCoder 3400e Quick Start Guide

6 EasyLAN Wireless Quick Start Guide
What’s New?
EasyLAN Wireless Model AW02 provides these features:
• Firmware version 4.30, which provides all of the functionality
of EasyLAN Wireless Model AW01.
• Wi-Fi Protected Access (WPA). You can use WPA-Personal,
which uses TKIP with a pre-shared key (PSK) for
authentication, or WPA-Enterprise, which uses 802.1x
authentication with TTLS and TKIP.
• EasyLAN Network Setup. This PC configuration wizard
facilitates the connection of an EasyCoder printer to your
wireless network.
• Improved web browser interface for configuration and
management. For details, see the EasyLAN Wireless User’s
Manual (P/N 074980).
Out of the Box
Your printer with EasyLAN Wireless comes with these items:
• PrinterCompanion CD, which includes:
• EasyLAN Wireless User’s Manual
• EasyLAN Network Setup
• Intermec Printer Network Manager (IPNM)
• Intermec Print Monitor
• Printer quick start guide and safety supplement
• Antenna
• This EasyLAN Wireless Quick Start Guide (P/N 074981)
• Important EasyLAN Wireless Information! (P/N 074991)

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch