Intermec EasyCoder 3400e Quick Start Guide

14 EasyLAN Wireless Quick Start Guide
Parameter Required Value
Baud rate 115200
Data bits 8
Stop bits 1
Parity None
Note: The EasyLAN Wireless console-only serial port
requires those settings.
4 After you click Finish to exit EasyLAN Network Setup, you
can now attach the antenna to the EasyLAN Wireless. For
help, see the next section, “Attaching the Antenna.”
Attaching the Antenna
For best performance, position the printer and antenna so that
the antenna has a line-of-sight exposure to the access point or
the wireless device that it communicates with.
Orange LED
Green LED
Yellow LED
Test switch
Antenna
Antenna
connector

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch