Intermec EasyCoder PD41 Spare Parts

Chapter 2 — Spare Parts
6 EasyCoder PD41 and PD42 Printer Spare Parts Catalog
Spare Parts Policy
This spare parts catalog contains information on items currently available as
spare parts and accessories for the Intermec EasyCoder PD41/PD42
printer.
For further information about parts not listed in this document, please
contact Intermec’s spare parts sales department for more information.
Information in this manual is subject to change without prior notice and
does not represent a commitment on the part of Intermec.
Note: For updated information, refer to the latest edition of the Spare Parts
Price List.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g