Intermec EasyCoder PD41 Spare Parts

Chapter 2 — Spare Parts
EasyCoder PD41 and PD42 Printer Spare Parts Catalog 25
Cutter
1
4
3
5
2
Screw
(2 places)
Screw
(2 places)
Screw
(2 places)
Screw
(2 places)
Thumb
screw
Callout Part Number Description Remarks
1 1-207109-801 Cutter module Complete unit.
2 160-000064-202 Cutter PCB Includes cable for the PCB to main plate.
3 1-207050-900 Cutter front lid, plastic moulding Includes thumbscrew.
4 141-000111-902 Cable cutter, main board to center plate
5 1-209109-001 Cutter module Not orderable.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g