Intermec EasyCoder PD41 Spare Parts

Chapter 2 — Spare Parts
12 EasyCoder PD41 and PD42 Printer Spare Parts Catalog
Thermal Printhead Module
1
2
5
3
4
Callout Part Number Description Remarks
1 1-010105-900 Thermal printhead 200 dpi kit Does not include printhead lift springs, and
adapter cable.
1 1-010106-900 Thermal printhead 300 dpi kit
2 141-000044-962 TPH module 200 dpi
2 141-000045-962 TPH module 300 dpi
3 141-000106-902 TPH PCB 200 dpi
3 141-000107-902 TPH PCB 300 dpi
4 141-000110-902 Cable, PCB to main board Same cable for 200 and 300 dpi versions.
5 141-000125-902 Printhead lift springs Includes 2 springs.

Intermec EasyCoder PD41 Specifications

General

Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Standard interfaces	RS-232, USB 2.0
Internal memory	16 MB
Power requirements	100-240 VAC ±10%, 45-65 Hz
Media thickness	2.3 - 9.8 mm
Maximum label width	104 mm
Maximum label length	0.15 m
Maximum roll diameter	213 mm
Maximum internal memory	1 GB
Supported network protocols	TCP/IP, LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP, SNMP-MIB II
Operating temperature (T-T)	40 - 104 °F
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Depth	453 mm
Width	273 mm
Height	270 mm
Weight	13000 g