Need help?Do you have a question about the Intermec IF2 and is the answer not in the manual?
General| Connectivity Technology | Wired |
|---|---|
| Technology | RFID |
| Frequency | 13.56MHz |
| Interface | USB |
| Read Range | Up to 3 in |
| Weight | 150 g |
| Operating Temperature | 32°F to 122°F |
| Storage Temperature | -4°F to 158°F |
| Humidity | 5-95% (non-condensing) |
Provides crucial safety warnings and cautions for operating Intermec equipment.
Explains the meaning of the six LEDs indicating reader status.
Explains initial network communication methods for the IF2.
Step-by-step guide to assigning an IP address to the IF2.
Instructions for configuring the IF2 using its web-based interface.
Guidance on mounting the IF2 device, including drilling template instructions.
Steps to connect the IF2 to a network, including power and Ethernet.
Methods and considerations for securing access to the IF2.
Overview of network configuration options available for the IF2.
Detailed steps for configuring wired Ethernet parameters like IP address.
Configuration of hostname, DNS, SNTP servers, and time zone.
Explains security features, including access services and user management.
How to enable or disable services like web browser and discovery.
Procedures for securing logins by changing defaults or using a password server.
How to configure RADIUS authentication for user logins.
Explains how applications communicate with the IF2 using BRI or LLRP.
How to configure BRI settings to control reader operation and communication.
How to configure the BRI server for application communication.
Overview of methods for managing the IF2 device.
Overview of methods to restore the IF2 to its factory default settings.
Procedure to restore IF2 default settings via the web browser interface.
How to restore default settings using the physical reset switch on the IF2.
Steps to restore default settings via a serial connection.
Lists common problems and their solutions for the IF2.
Solutions for common issues encountered when working with RFID.
Solutions for common network connectivity issues with the IF2.
Explains how to configure and install firmware upgrades for the IF2.
Methods for installing and running IF2 firmware upgrades.
Physical dimensions, electrical ratings, and environmental requirements.
Supported RFID protocols, frequency range, and output power.
To Next Page
